Home - Waterfall Grid T-Grid Console Builders Recent Builds Buildslaves Changesources - JSON API - About

Console View

Legend:   Passed Failed Warnings Failed Again Running Exception Offline No data

f4ebd1ead0d0...
Stijn Tintel
kernel: drop old symbol from 4.19
CONFIG_LIRC_STAGING was removed in kernel 4.16.

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
  • ath79/nand: Uploading target files failed -  stdio
  • ramips/mt7620: Uploading target files failed -  stdio
f4aa9d883995...
Mathias Kresin
firmware-utils: mkdlinkfw: cleanup code
Drop unused function and macros. With the cleanup the gnu extension
typeof isn't used any longer and the gnu99 compile flag can be dropped.

Signed-off-by: Mathias Kresin <dev@kresin.me>
  • at91/sama5d2: Building and installing tools failed -  stdio
  • at91/sama5d3: Building and installing tools failed -  stdio
  • at91/sama5d4: Building and installing tools failed -  stdio
  • bcm53xx/generic: Building and installing tools failed -  stdio
  • brcm63xx/smp: Building and installing tools failed -  stdio
  • brcm2708/bcm2708: Building and installing tools failed -  stdio
  • brcm2708/bcm2709: Building and installing tools failed -  stdio
  • lantiq/xrx200: Building and installing tools failed -  stdio
  • layerscape/armv7: Building and installing tools failed -  stdio
  • octeon/generic: Building and installing tools failed -  stdio
  • ramips/mt7620: Building and installing tools failed -  stdio
  • ramips/mt7621: Building and installing tools failed -  stdio
  • samsung/s5pv210: Building and installing tools failed -  stdio
e428b127e7c9...
Mathias Kresin
firmware-utils: mkdlinkfw: create reproducible header
Use the SOURCE_DATE_EPOCH environment variable if set instead of the
current time. The used timestamp matches the timestamp of the latest
commit this way and make the images reproducible.

Signed-off-by: Mathias Kresin <dev@kresin.me>
  • at91/sama5d2: Building and installing tools failed -  stdio
  • at91/sama5d3: Building and installing tools failed -  stdio
  • at91/sama5d4: Building and installing tools failed -  stdio
  • bcm53xx/generic: Building and installing tools failed -  stdio
  • brcm63xx/smp: Building and installing tools failed -  stdio
  • brcm2708/bcm2708: Building and installing tools failed -  stdio
  • brcm2708/bcm2709: Building and installing tools failed -  stdio
  • lantiq/xrx200: Building and installing tools failed -  stdio
  • layerscape/armv7: Building and installing tools failed -  stdio
  • octeon/generic: Building and installing tools failed -  stdio
  • ramips/mt7620: Building and installing tools failed -  stdio
  • ramips/mt7621: Building and installing tools failed -  stdio
  • samsung/s5pv210: Building and installing tools failed -  stdio
d60583106860...
Zoltan HERPAI
uboot-sunxi: update Theobroma A31 Pangolin support
Drop removed pinctrl definitions from the i2c3 pin layout.

Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
  • at91/sama5d2: Building and installing tools failed -  stdio
  • at91/sama5d3: Building and installing tools failed -  stdio
  • at91/sama5d4: Building and installing tools failed -  stdio
  • bcm53xx/generic: Building and installing tools failed -  stdio
  • brcm63xx/smp: Building and installing tools failed -  stdio
  • brcm2708/bcm2708: Building and installing tools failed -  stdio
  • brcm2708/bcm2709: Building and installing tools failed -  stdio
  • lantiq/xrx200: Building and installing tools failed -  stdio
  • layerscape/armv7: Building and installing tools failed -  stdio
  • octeon/generic: Building and installing tools failed -  stdio
  • ramips/mt7620: Building and installing tools failed -  stdio
  • ramips/mt7621: Building and installing tools failed -  stdio
  • samsung/s5pv210: Building and installing tools failed -  stdio
d560deb7f224...
Hauke Mehrtens
uboot-sunxi: Orange Pi Zero Plus: Fix SdCard detection
The Detection pin is at PF6 and not at PH13 like defined before. I
checked the schematics and now I am am not seeing this error message any
more:
Loading Environment from FAT... Card did not respond to voltage select!

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
  • at91/sama5d2: Building and installing tools failed -  stdio
  • at91/sama5d3: Building and installing tools failed -  stdio
  • at91/sama5d4: Building and installing tools failed -  stdio
  • bcm53xx/generic: Building and installing tools failed -  stdio
  • brcm63xx/smp: Building and installing tools failed -  stdio
  • brcm2708/bcm2708: Building and installing tools failed -  stdio
  • brcm2708/bcm2709: Building and installing tools failed -  stdio
  • lantiq/xrx200: Building and installing tools failed -  stdio
  • layerscape/armv7: Building and installing tools failed -  stdio
  • octeon/generic: Building and installing tools failed -  stdio
  • ramips/mt7620: Building and installing tools failed -  stdio
  • ramips/mt7621: Building and installing tools failed -  stdio
  • samsung/s5pv210: Building and installing tools failed -  stdio
cfc9bde379fd...
Hauke Mehrtens
kernel/modules: Add missing config option
This configuration option was added in kernel 4.15 and is missing in the
kernel 4.19 configuration.

Fixes: ed2839ac419 ("kernel/modules: add kmod-pmbus-zl6100 module")
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
  • at91/sama5d2: Building and installing tools failed -  stdio
  • at91/sama5d3: Building and installing tools failed -  stdio
  • at91/sama5d4: Building and installing tools failed -  stdio
  • bcm53xx/generic: Building and installing tools failed -  stdio
  • brcm63xx/smp: Building and installing tools failed -  stdio
  • brcm2708/bcm2708: Building and installing tools failed -  stdio
  • brcm2708/bcm2709: Building and installing tools failed -  stdio
  • lantiq/xrx200: Building and installing tools failed -  stdio
  • layerscape/armv7: Building and installing tools failed -  stdio
  • octeon/generic: Building and installing tools failed -  stdio
  • ramips/mt7620: Building and installing tools failed -  stdio
  • ramips/mt7621: Building and installing tools failed -  stdio
  • samsung/s5pv210: Building and installing tools failed -  stdio
c7102a76992d...
Hauke Mehrtens
kernel/modules: Fix build of kmod-pmbus
This fixes two build problems introduced with the recently added new
kernel module package.

Fixes: ed2839ac4190 ("kernel/modules: add kmod-pmbus-zl6100 module")
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
  • at91/sama5d2: Building and installing tools failed -  stdio
  • at91/sama5d3: Building and installing tools failed -  stdio
  • at91/sama5d4: Building and installing tools failed -  stdio
  • bcm53xx/generic: Building and installing tools failed -  stdio
  • brcm63xx/smp: Building and installing tools failed -  stdio
  • brcm2708/bcm2708: Building and installing tools failed -  stdio
  • brcm2708/bcm2709: Building and installing tools failed -  stdio
  • lantiq/xrx200: Building and installing tools failed -  stdio
  • layerscape/armv7: Building and installing tools failed -  stdio
  • octeon/generic: Building and installing tools failed -  stdio
  • ramips/mt7620: Building and installing tools failed -  stdio
  • ramips/mt7621: Building and installing tools failed -  stdio
  • samsung/s5pv210: Building and installing tools failed -  stdio
c54e4747beef...
Hauke Mehrtens
kernel: MIPS: Add CPU option reporting to /proc/cpuinfo
Many MIPS CPUs have optional CPU features which are not activates for
all CPU cores. Print the CPU options which are implemented in the core
in /proc/cpuinfo. This makes it possible to see what features are
supported and which are not supported. This should cover all standard
MIPS extensions, before it only printed information about the main MIPS
ASEs.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
  • at91/sama5d2: Building and installing tools failed -  stdio
  • at91/sama5d3: Building and installing tools failed -  stdio
  • at91/sama5d4: Building and installing tools failed -  stdio
  • bcm53xx/generic: Building and installing tools failed -  stdio
  • brcm63xx/smp: Building and installing tools failed -  stdio
  • brcm2708/bcm2708: Building and installing tools failed -  stdio
  • brcm2708/bcm2709: Building and installing tools failed -  stdio
  • lantiq/xrx200: Building and installing tools failed -  stdio
  • layerscape/armv7: Building and installing tools failed -  stdio
  • octeon/generic: Building and installing tools failed -  stdio
  • ramips/mt7620: Building and installing tools failed -  stdio
  • ramips/mt7621: Building and installing tools failed -  stdio
  • samsung/s5pv210: Building and installing tools failed -  stdio
bd03255ec4b4...
Chuanhong Guo
generic: ar8216: ar8327: kill warnings
This fixed warnings caused by returning value in a void function

Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
  • at91/legacy: Building kmods failed -  stdio
  • at91/sama5d2: Building and installing tools failed -  stdio
  • at91/sama5d3: Building and installing tools failed -  stdio
  • at91/sama5d4: Building and installing tools failed -  stdio
  • bcm53xx/generic: Building and installing tools failed -  stdio
  • brcm47xx/legacy: Building packages failed -  stdio
  • brcm63xx/smp: Building and installing tools failed -  stdio
  • brcm2708/bcm2708: Building and installing tools failed -  stdio
  • brcm2708/bcm2709: Building and installing tools failed -  stdio
  • lantiq/xrx200: Building and installing tools failed -  stdio
  • layerscape/armv7: Building and installing tools failed -  stdio
  • malta/be: Building packages failed -  stdio
  • octeon/generic: Building and installing tools failed -  stdio
  • ramips/mt7620: Building and installing tools failed -  stdio
  • ramips/mt7621: Building and installing tools failed -  stdio
  • samsung/s5pv210: Building and installing tools failed -  stdio
ba4fe412c44e...
Kevin Darbyshire-Bryant
elfutils: bump to 0.175
4ea9a2db164c Update upload-release.sh script and po files.
a01938d584b9 libelf: Mark both fsize and msize with const attribute.
c338a0541663 libebl: Don't update w, t and len unnecessarily in ebl_object_note_type_name.
422b549007f6 Prepare for 0.175
22ec8efc1dd8 elflint: Allow PT_GNU_EH_FRAME segment to match SHT_X86_64_UNWIND section.
cf10453f8252 libelf: Correctly setup alignment of SHF_COMPRESSED section data.
d3e6266754b9 strip: Also handle gnu compressed debug sections with --reloc-debug-sections
72e30c2e0cb4 Handle GNU Build Attribute ELF Notes.
7a3f6fe60b85 Recognize NT_VERSION notes.
cff53f1784c9 libcpu: Recognize bpf jump variants BPF_JLT, BPF_JLE, BPF_JSLT and BPF_JSLE
ecbe3120cddb libdwelf: New function dwelf_elf_begin.
4b0342b85b5b backends: Add x86_64 section_type_name for SHT_X86_64_UNWIND.
825e48c4e942 Also find CFI in sections of type SHT_X86_64_UNWIND
4789e0fb92b0 libelf: Explicitly update section data after (de)compression.
1628254ba215 strip: Add --reloc-debug-sections-only option.
f2d59180b90b strip: Extract code to update shdrstrndx into new common function.
f6ae0ab9350e strip: Split out debug section relocation into separate helper functions.
b15ee95bcee4 strip: Always copy over any phdrs if there are any.
e574889d92b1 unstrip: Add ELF_CHECK to make sure gelf_getehdr () doesn't return NULL.
5199e15870e0 Recognize and parse GNU Property notes.
b75ff1bbd060 addr2line: Use elf_getshdrstrndx not Ehdr field to print section name.
35197ea4c43e readelf: Use shstrndx to lookup section names.
9a74c190a2b3 backends: ppc use define instead of const for size of dwarf_regs array.
72d023b35f36 readelf: Make sure readp is smaller than cieend in print_debug_frame_section.
dce0b3b63ba0 readelf: Make sure readp is smaller than cieend in print_debug_frame_section.
1e7c230b277b Check sh_entsize is not zero.
22d2d082d57a size: Handle recursive ELF ar files.
2b16a9be6993 arlib: Check that sh_entsize isn't zero.
4cdb0fd0d3b4 ar: Assume epoch if ar_date is bogus.
577511f66842 findtextrel: Check that sh_entsize isn't zero.
20f9de9b5f70 libdwfl: Sanity check partial core file data reads.
2f4a040fab52 readelf: Handle multiple .debug_macro sections and decode header flag.
eee4269e5315 unstrip: Renumber the group section indexes.
c06ab0bbb476 strip, unstrip: Handle SHT_GROUP correctly.
2876b3b648f6 Handle ADD/SUB relocations
69d6e67eee30 tests: backtrace-dwarf.c improve error handling in test framework.

Originally-produced--by: Koen Vandeputte <koen.vandeputte@ncentric.com>
Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
  • ar71xx/nand: Cleaning previous builds failed -  stdio
  • ar71xx/tiny: Cleaning previous builds failed -  stdio
  • archs38/generic: Cleaning previous builds failed -  stdio
  • armvirt/64: Cleaning previous builds failed -  stdio
  • at91/sama5d2: Cleaning previous builds failed -  stdio
  • at91/sama5d3: Cleaning previous builds failed -  stdio
  • at91/sama5d4: Cleaning previous builds failed -  stdio
  • bcm53xx/generic: Cleaning previous builds failed -  stdio
  • brcm47xx/generic: Cleaning previous builds failed -  stdio
  • brcm63xx/generic: Cleaning previous builds failed -  stdio
  • brcm63xx/smp: Cleaning previous builds failed -  stdio
  • brcm2708/bcm2708: Cleaning previous builds failed -  stdio
  • brcm2708/bcm2709: Cleaning previous builds failed -  stdio
  • imx6/generic: Cleaning previous builds failed -  stdio
  • ipq40xx/generic: Cleaning previous builds failed -  stdio
  • ipq806x/generic: Cleaning previous builds failed -  stdio
  • ixp4xx/generic: Cleaning previous builds failed -  stdio
  • ixp4xx/harddisk: Uploading directory structure failed -  stdio
  • kirkwood/generic: Cleaning previous builds failed -  stdio
  • lantiq/ase: Cleaning previous builds failed -  stdio
  • lantiq/falcon: Cleaning previous builds failed -  stdio
  • lantiq/xrx200: Cleaning previous builds failed -  stdio
  • lantiq/xway: Cleaning previous builds failed -  stdio
  • lantiq/xway_legacy: Cleaning previous builds failed -  stdio
  • layerscape/armv7: Cleaning previous builds failed -  stdio
  • layerscape/armv8_32b: Cleaning previous builds failed -  stdio
  • mpc85xx/p1020: Cleaning previous builds failed -  stdio
  • octeon/generic: Cleaning previous builds failed -  stdio
  • octeontx/generic: Cleaning previous builds failed -  stdio
  • oxnas/ox820: Cleaning previous builds failed -  stdio
  • ramips/mt7620: Cleaning previous builds failed -  stdio
  • ramips/mt7621: Cleaning previous builds failed -  stdio
  • ramips/rt288x: Cleaning previous builds failed -  stdio
  • ramips/rt305x: Cleaning previous builds failed -  stdio
  • rb532/generic: Cleaning previous builds failed -  stdio
  • samsung/s5pv210: Cleaning previous builds failed -  stdio
  • sunxi/cortexa7: Cleaning previous builds failed -  stdio
  • sunxi/cortexa8: Cleaning previous builds failed -  stdio
  • sunxi/cortexa53: Cleaning previous builds failed -  stdio
  • x86/geode: Cleaning previous builds failed -  stdio
  • x86/legacy: Cleaning previous builds failed -  stdio
ad8c2d6099a7...
Mathias Kresin
tools: add zip utility
One image requires a zip compressed image, so add the zip util found in
the packages feed, and extend it with some useful debian patches.

Signed-off-by: Mathias Kresin <dev@kresin.me>
  • kirkwood/generic: Uploading target files failed -  stdio
a37098a2d013...
Stijn Tintel
kernel: bump 4.19 to 4.19.16
Refresh patches.
Remove upstreamed patches:
- backport/096-mips-math-emu-Write-protect-delay-slot-emulation-pages.patch
- backport/096-v4.20-netfilter-ipv6-Preserve-link-scope-traffic-original-.patch
- backport/424-v4.20-net-dsa-fix-88e6060-roaming.patch
- hack/100-mtd-rawnand-qcom-fix-memory-corruption-that-causes-p.patch
- pending/510-f2fs-fix-sanity_check_raw_super-on-big-endian-machines.patch
Update patch that no longer applies:
- backport/343-netfilter-nft_flow_offload-handle-netdevice-events-f.patch

Compile-tested: mesongx
Runtime-tested: mesongx

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
  • ath79/nand: Uploading target files failed -  stdio
  • ramips/mt7620: Uploading target files failed -  stdio
97e4311fca73...
David Bauer
mpc85xx: add support for Sophos RED 15w Rev.1
Hardware
========
CPU:  Freescale P1010 PowerPC
RAM:  128M DDR3
NAND: 128MiB
ETH:  RTL8211F SGMII PHY
      RTL8367B 5-port RGMII switch
      (not connected to SoC - unmanaged)
WiFi: SparkLan WPEA-121N
      - Atheros AR9382 2T2R abgn
USB:  1x USB 2.0
LED:  System, Router, Internet, Tunnel controllable
      LAN1-4, WAN, Power non-controllable
BTN:  None

Installation
============
1. Power on the device while attached to the Console port.

2. Halt the U-Boot by pressing Enter when prompted.

3. Set the correct bootcmd for booting OpenWRT:
> setenv bootargs_owrt "setenv bootargs console=ttyS0,115200"
> setenv bootcmd "run bootargs_owrt;
  nand read 0x1000000 0x300000 0x800000;
  bootm 0x1000000;"
> saveenv

5. Rename OpenWRT initramfs image to 'kernel.bin' and place it in a
  TFTP server root-directory served on 192.168.1.2/24. Connect your
  computer to one of the LAN-ports.

4. Boot OpenWRT initramfs image with
> run bootargs_owrt; tftpboot 0x1000000 192.168.1.2:kernel.bin;
  bootm 0x1000000;

6. (Optional)
  Make a Backup of 'sophos-os1', 'sophos-os2' and 'sophos-data' in case
  you ever want to go back to the vendor firmware.

7. Create Ubi Volume on mtd4 by executing
> ubiformat /dev/mtd4 -y

8. Transfer OpenWRT sysupgrade image to the device via SCP and install it
  with
> sysupgrade -n <openwrt-image-file>

Back to Stock
=============
If you want to go back to the stock firmware, here is the bootcmd of the
vendor firmware:
> setenv bootargs console=ttyS0,115200 root=/dev/mtdblock5;
  nand read 0xc00000 0x00300000  0x100000;
  nand read 0x1000000 0x00400000 0x00800000;
  bootm 0x1000000 - 0xc00000

Set it via 'setenv' from the U-Boot shell and don't forget to save it
using 'saveenv'!

After this, boot the OpenWRT initramfs image just like you would for
installation. Write back the three vendor partitions using mtd. Reboot
the device afterwards.

Signed-off-by: David Bauer <mail@david-bauer.net>
[refresh and reorder patches]
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
  • ar7/ac49x: Building kmods failed -  stdio
  • arc770/generic: Building packages failed -  stdio
  • at91/legacy: Building kmods failed -  stdio
  • at91/sama5d2: Building and installing tools failed -  stdio
  • at91/sama5d3: Building and installing tools failed -  stdio
  • at91/sama5d4: Building and installing tools failed -  stdio
  • ath25/generic: Building packages failed -  stdio
  • ath79/generic: Building packages failed -  stdio
  • ath79/nand: Building packages failed -  stdio
  • ath79/tiny: Building packages failed -  stdio
  • bcm53xx/generic: Building and installing tools failed -  stdio
  • brcm47xx/legacy: Building packages failed -  stdio
  • brcm47xx/mips74k: Building packages failed -  stdio
  • brcm63xx/smp: Building and installing tools failed -  stdio
  • brcm2708/bcm2708: Building and installing tools failed -  stdio
  • brcm2708/bcm2709: Building and installing tools failed -  stdio
  • lantiq/xrx200: Building and installing tools failed -  stdio
  • layerscape/armv7: Building and installing tools failed -  stdio
  • malta/be: Building packages failed -  stdio
  • octeon/generic: Building and installing tools failed -  stdio
  • ramips/mt7620: Building and installing tools failed -  stdio
  • ramips/mt7621: Building and installing tools failed -  stdio
  • samsung/s5pv210: Building and installing tools failed -  stdio
95d4c7c24b37...
Hauke Mehrtens
arm-trusted-firmware-sunxi: Replace with official ARM version
Instead of using a fork of the ARM trusted firmware specifically for the
Allwinner SoCs, use the official version from ARM now, this version
supports the Allwinner SoCs now and the older ATF repository is
deprecated.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
  • at91/sama5d2: Building and installing tools failed -  stdio
  • at91/sama5d3: Building and installing tools failed -  stdio
  • at91/sama5d4: Building and installing tools failed -  stdio
  • bcm53xx/generic: Building and installing tools failed -  stdio
  • brcm63xx/smp: Building and installing tools failed -  stdio
  • brcm2708/bcm2708: Building and installing tools failed -  stdio
  • brcm2708/bcm2709: Building and installing tools failed -  stdio
  • lantiq/xrx200: Building and installing tools failed -  stdio
  • layerscape/armv7: Building and installing tools failed -  stdio
  • octeon/generic: Building and installing tools failed -  stdio
  • ramips/mt7620: Building and installing tools failed -  stdio
  • ramips/mt7621: Building and installing tools failed -  stdio
  • samsung/s5pv210: Building and installing tools failed -  stdio
900c6b1a42d0...
Hauke Mehrtens
sunxi: Add support for kernel 4.19
This adds supprot for kernel 4.19 to the sunxi target. The patches and
the configuration were copied from the kernel 4.14 patches folder and
adapted for kernel 4.19.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
  • at91/sama5d2: Building and installing tools failed -  stdio
  • at91/sama5d3: Building and installing tools failed -  stdio
  • at91/sama5d4: Building and installing tools failed -  stdio
  • bcm53xx/generic: Building and installing tools failed -  stdio
  • brcm63xx/smp: Building and installing tools failed -  stdio
  • brcm2708/bcm2708: Building and installing tools failed -  stdio
  • brcm2708/bcm2709: Building and installing tools failed -  stdio
  • lantiq/xrx200: Building and installing tools failed -  stdio
  • layerscape/armv7: Building and installing tools failed -  stdio
  • octeon/generic: Building and installing tools failed -  stdio
  • ramips/mt7620: Building and installing tools failed -  stdio
  • ramips/mt7621: Building and installing tools failed -  stdio
  • samsung/s5pv210: Building and installing tools failed -  stdio
8c6f00ef4f17...
Stijn Tintel
kernel: bump 4.14 to 4.14.93
Refresh patches.
Remove upstreamed patches:
- backport/096-mips-math-emu-Write-protect-delay-slot-emulation-pages.patch
- pending/510-f2fs-fix-sanity_check_raw_super-on-big-endian-machines.patch
- brcm2708/950-0415-qmi_wwan-apply-SET_DTR-quirk-to-the-SIMCOM-shared-de.patch

Compile-tested: ar71xx, ath79, brcm2708/bcm27{08,10}, octeon, x86/64
Runtime-tested: ar71xx, ath79, brcm2708/bcm27{08,10}, octeon, x86/64

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
  • at91/legacy: Building and installing images failed -  stdio
85be0f4c2165...
Christian Lamparter
apm821xx: 4.14: sync config
This patch syncs the 4.14 kernel config to the
current generic configuration.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
  • ar7/ac49x: Building kmods failed -  stdio
  • arc770/generic: Building packages failed -  stdio
  • at91/legacy: Building kmods failed -  stdio
  • at91/sama5d2: Building and installing tools failed -  stdio
  • at91/sama5d3: Building and installing tools failed -  stdio
  • at91/sama5d4: Building and installing tools failed -  stdio
  • ath25/generic: Building packages failed -  stdio
  • ath79/generic: Building packages failed -  stdio
  • ath79/nand: Building packages failed -  stdio
  • ath79/tiny: Building packages failed -  stdio
  • bcm53xx/generic: Building and installing tools failed -  stdio
  • brcm47xx/legacy: Building packages failed -  stdio
  • brcm47xx/mips74k: Building packages failed -  stdio
  • brcm63xx/smp: Building and installing tools failed -  stdio
  • brcm2708/bcm2708: Building and installing tools failed -  stdio
  • brcm2708/bcm2709: Building and installing tools failed -  stdio
  • lantiq/xrx200: Building and installing tools failed -  stdio
  • layerscape/armv7: Building and installing tools failed -  stdio
  • malta/be: Building packages failed -  stdio
  • octeon/generic: Building and installing tools failed -  stdio
  • ramips/mt7620: Building and installing tools failed -  stdio
  • ramips/mt7621: Building and installing tools failed -  stdio
  • samsung/s5pv210: Building and installing tools failed -  stdio
7a53fb40ca2f...
Zoltan HERPAI
uboot-sunxi: disable AXP209 on Olimex A13 Olinuxino
Disable the PMIC on Olimex A13 Olinuxino, as the SPL cannot set the
core voltage correctly, which causes the board to freeze later at
kernel if CPU throttling is enabled (see below). This will almost
certainly kill the VGA output (which requires LDO3 to be set), but
this is still a better option than to disable CPU throttling for
all Cortex-A8 based devices.

[    2.485632] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 384000 KHz
[    2.525698] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 432000 KHz

Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
  • at91/sama5d2: Building and installing tools failed -  stdio
  • at91/sama5d3: Building and installing tools failed -  stdio
  • at91/sama5d4: Building and installing tools failed -  stdio
  • bcm53xx/generic: Building and installing tools failed -  stdio
  • brcm63xx/smp: Building and installing tools failed -  stdio
  • brcm2708/bcm2708: Building and installing tools failed -  stdio
  • brcm2708/bcm2709: Building and installing tools failed -  stdio
  • lantiq/xrx200: Building and installing tools failed -  stdio
  • layerscape/armv7: Building and installing tools failed -  stdio
  • octeon/generic: Building and installing tools failed -  stdio
  • ramips/mt7620: Building and installing tools failed -  stdio
  • ramips/mt7621: Building and installing tools failed -  stdio
  • samsung/s5pv210: Building and installing tools failed -  stdio
7a4075bd10f3...
Hans Dedecker
busybox: fix ALTERNATIVES alphabetical ordering
Commit 3f0eb71dae added ALTERNATIVES for wget but not in correct
alphabetical order; increase PKG_RELEASE as well.

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
76cc76652112...
Hans Dedecker
odhcpd: fix onlink IA check (FS#2060)
0a36768 dhcpv6-ia: fix compiler warning
1893905 dhcpv6-ia: fix onlink IA check (FS#2060)

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
  • at91/sama5d2: Uploading target files failed -  stdio
  • ath79/nand: Uploading target files failed -  stdio
  • brcm63xx/smp: Uploading kmod archive failed -  stdio
  • lantiq/xrx200: Uploading kmod archive failed -  stdio
  • ramips/mt7620: Uploading target files failed -  stdio
7541d30c9c29...
Kevin Darbyshire-Bryant
dnsmasq: backport latest pre2.81 patches
f52bb5b fix previous commit
18eac67 Fix entries in /etc/hosts disabling static leases.
f8c77ed Fix removal of DHCP_CLIENT_MAC options from DHCPv6 relay replies.
4bf62f6 Tidy cache_blockdata_free()
9c0d445 Fix e7bfd556c079c8b5e7425aed44abc35925b24043 to actually work.
2896e24 Check for not(DS or DNSKEY) in is_outdated_cname_pointer()
a90f09d Fix crash freeing negative SRV cache entries.
5b99eae Cache SRV records.
2daca52 Fix typo in ra-param man page section.
2c59473 File logic bug in cache-marshalling code. Introduced a couple of commits back.
cc921df Remove nested struct/union in cache records and all_addr.
ab194ed Futher address union tidying.
65a01b7 Tidy address-union handling: move class into explicit argument.
bde4647 Tidy all_addr union, merge log and rcode fields.
e7bfd55 Alter DHCP address selection after DECLINE in consec-addr mode. Avoid offering the same address after a recieving a DECLINE message to stop an infinite protocol loop. This has long been done in default address allocation mode: this adds similar behaviour when allocaing addresses consecutively.

The most relevant fix for openwrt is 18eac67 (& my own local f52bb5b
which fixes a missing bracket silly) To quote the patch:

It is possible for a config entry to have one address family specified by a
dhcp-host directive and the other added from /etc/hosts. This is especially
common on OpenWrt because it uses odhcpd for DHCPv6 and IPv6 leases are
imported into dnsmasq via a hosts file.

To handle this case there need to be separate *_HOSTS flags for IPv4 and IPv6.
Otherwise when the hosts file is reloaded it will clear the CONFIG_ADDR(6) flag
which was set by the dhcp-host directive.

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
  • at91/sama5d2: Uploading target files failed -  stdio
  • brcm63xx/smp: Uploading kmod archive failed -  stdio
  • lantiq/xrx200: Uploading kmod archive failed -  stdio
  • ramips/mt7620: Uploading target files failed -  stdio
6e104c63d678...
Kevin Darbyshire-Bryant
kmod-sched-cake: bump to latest cake
331ac70 Correctly update parent qlen when splitting GSO packets
581967c Makefile: Hook into Kbuild/Kconfig infrastructure

The parent qlen change is relevant if using cake as a leaf qdisc,
the makefile is a no-op.

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
  • ar71xx/nand: Cleaning previous builds failed -  stdio
  • ar71xx/tiny: Cleaning previous builds failed -  stdio
  • archs38/generic: Cleaning previous builds failed -  stdio
  • armvirt/64: Cleaning previous builds failed -  stdio
  • at91/sama5d2: Cleaning previous builds failed -  stdio
  • at91/sama5d3: Cleaning previous builds failed -  stdio
  • at91/sama5d4: Cleaning previous builds failed -  stdio
  • bcm53xx/generic: Cleaning previous builds failed -  stdio
  • brcm47xx/generic: Cleaning previous builds failed -  stdio
  • brcm63xx/generic: Cleaning previous builds failed -  stdio
  • brcm63xx/smp: Cleaning previous builds failed -  stdio
  • brcm2708/bcm2708: Cleaning previous builds failed -  stdio
  • brcm2708/bcm2709: Cleaning previous builds failed -  stdio
  • imx6/generic: Cleaning previous builds failed -  stdio
  • ipq40xx/generic: Cleaning previous builds failed -  stdio
  • ipq806x/generic: Cleaning previous builds failed -  stdio
  • ixp4xx/generic: Cleaning previous builds failed -  stdio
  • ixp4xx/harddisk: Uploading directory structure failed -  stdio
  • kirkwood/generic: Cleaning previous builds failed -  stdio
  • lantiq/ase: Cleaning previous builds failed -  stdio
  • lantiq/falcon: Cleaning previous builds failed -  stdio
  • lantiq/xrx200: Cleaning previous builds failed -  stdio
  • lantiq/xway: Cleaning previous builds failed -  stdio
  • lantiq/xway_legacy: Cleaning previous builds failed -  stdio
  • layerscape/armv7: Cleaning previous builds failed -  stdio
  • layerscape/armv8_32b: Cleaning previous builds failed -  stdio
  • mpc85xx/p1020: Cleaning previous builds failed -  stdio
  • octeon/generic: Cleaning previous builds failed -  stdio
  • octeontx/generic: Cleaning previous builds failed -  stdio
  • oxnas/ox820: Cleaning previous builds failed -  stdio
  • ramips/mt7620: Cleaning previous builds failed -  stdio
  • ramips/mt7621: Cleaning previous builds failed -  stdio
  • ramips/rt288x: Cleaning previous builds failed -  stdio
  • ramips/rt305x: Cleaning previous builds failed -  stdio
  • rb532/generic: Cleaning previous builds failed -  stdio
  • samsung/s5pv210: Cleaning previous builds failed -  stdio
  • sunxi/cortexa7: Cleaning previous builds failed -  stdio
  • sunxi/cortexa8: Cleaning previous builds failed -  stdio
  • sunxi/cortexa53: Cleaning previous builds failed -  stdio
  • x86/geode: Cleaning previous builds failed -  stdio
  • x86/legacy: Cleaning previous builds failed -  stdio
6a3f8b88185b...
Mathias Kresin
build: remove duplicate mksercomfw image recipe
Keep the ramips/mt76x8 copy, since it's only required for this target at
the moment.

Signed-off-by: Mathias Kresin <dev@kresin.me>
  • at91/sama5d2: Building and installing tools failed -  stdio
  • at91/sama5d3: Building and installing tools failed -  stdio
  • at91/sama5d4: Building and installing tools failed -  stdio
  • bcm53xx/generic: Building and installing tools failed -  stdio
  • brcm63xx/smp: Building and installing tools failed -  stdio
  • brcm2708/bcm2708: Building and installing tools failed -  stdio
  • brcm2708/bcm2709: Building and installing tools failed -  stdio
  • lantiq/xrx200: Building and installing tools failed -  stdio
  • layerscape/armv7: Building and installing tools failed -  stdio
  • octeon/generic: Building and installing tools failed -  stdio
  • ramips/mt7620: Building and installing tools failed -  stdio
  • ramips/mt7621: Building and installing tools failed -  stdio
  • samsung/s5pv210: Building and installing tools failed -  stdio
63a2ed3ba5bc...
Koen Vandeputte
kernel: bump 4.9 to 4.9.150
Refreshed all patches.

Remove upstreamed:
- 096-mips-math-emu-Write-protect-delay-slot-emulation-pages.patch

Altered patches:
- 024-7-net-reorganize-struct-sock-for-better-data-locality.patch

Compile-tested on: ar7
Runtime-tested on: none

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
5de6aed42c35...
Pawel Dembicki
mpc85xx: add support for Freescale (NXP) P2020RDB
This commit add initial support for Freescale (NXP) P2020RDB

Hardware:
SoC: P2020 2x1GHz
DRAM: 512-1GB DDR3
2 + 4 GBE (2 separate ports and four in VSC7385)
Flash: 16MB NOR, 32MB NAND, 16MB SPI-NOR
PCIE x1 and mPCIE x1
SD Reader

Interfaces:
GBE RJ45 x6
USB2.0 x1
UART x2
I2C x2
JTAG x1
SD x1
PCIE x2 (PCIE and mPCIE)

Flash instructions:
Place sysupgrade image to 0x80000 address in NOR.
Eg. (no brakelines in setenv command):

setenv 'firmware_flash tftpboot $loadaddr $firmwarefile;
protect off $norfdtaddr +$filesize; erase $norfdtaddr +$filesize;
cp.b $loadaddr $norfdtaddr $filesize; protect on $norfdtaddr +$filesize;
cmp.b $loadaddr $norfdtaddr $filesize'
setenv firmwarefile firmware.bin
run firmware_flash

Boot (no brakeline in setenv command):
setenv bootcmd 'setenv bootargs root=/dev/mtdblock3 rw console=$consoledev,
$baudrate rootfstype=squashfs $othbootargs;
bootm $norfdtaddr'
saveenv
boot

Known issues:
-Switch is unmanaged (VSC 7385 is connected via eLBC, driver uses SPI)
-No SD reader support

Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [refreshed patches]
  • ar7/ac49x: Building kmods failed -  stdio
  • arc770/generic: Building packages failed -  stdio
  • at91/legacy: Building kmods failed -  stdio
  • at91/sama5d2: Building and installing tools failed -  stdio
  • at91/sama5d3: Building and installing tools failed -  stdio
  • at91/sama5d4: Building and installing tools failed -  stdio
  • ath25/generic: Building packages failed -  stdio
  • ath79/generic: Building packages failed -  stdio
  • ath79/nand: Building packages failed -  stdio
  • ath79/tiny: Building packages failed -  stdio
  • bcm53xx/generic: Building and installing tools failed -  stdio
  • brcm47xx/legacy: Building packages failed -  stdio
  • brcm47xx/mips74k: Building packages failed -  stdio
  • brcm63xx/smp: Building and installing tools failed -  stdio
  • brcm2708/bcm2708: Building and installing tools failed -  stdio
  • brcm2708/bcm2709: Building and installing tools failed -  stdio
  • lantiq/xrx200: Building and installing tools failed -  stdio
  • layerscape/armv7: Building and installing tools failed -  stdio
  • malta/be: Building packages failed -  stdio
  • octeon/generic: Building and installing tools failed -  stdio
  • ramips/mt7620: Building and installing tools failed -  stdio
  • ramips/mt7621: Building and installing tools failed -  stdio
  • samsung/s5pv210: Building and installing tools failed -  stdio
5be22ef2faad...
Koen Vandeputte
kernel: bump 3.18 to 3.18.132
Refreshed all patches.

Compile-tested: adm5120
Runtime-tested: none

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
4ed05b805b02...
Hauke Mehrtens
uboot-sunxi: Update to version 2018.11
This updates the uboot for the sunxi target to version 2018.11
The removed patches are applied upstream and not needed any more.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
  • at91/sama5d2: Building and installing tools failed -  stdio
  • at91/sama5d3: Building and installing tools failed -  stdio
  • at91/sama5d4: Building and installing tools failed -  stdio
  • bcm53xx/generic: Building and installing tools failed -  stdio
  • brcm63xx/smp: Building and installing tools failed -  stdio
  • brcm2708/bcm2708: Building and installing tools failed -  stdio
  • brcm2708/bcm2709: Building and installing tools failed -  stdio
  • lantiq/xrx200: Building and installing tools failed -  stdio
  • layerscape/armv7: Building and installing tools failed -  stdio
  • octeon/generic: Building and installing tools failed -  stdio
  • ramips/mt7620: Building and installing tools failed -  stdio
  • ramips/mt7621: Building and installing tools failed -  stdio
  • samsung/s5pv210: Building and installing tools failed -  stdio
4ab689c1378f...
Hauke Mehrtens
malta: Refresh kernel 4.14 configuration
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
  • at91/sama5d2: Building and installing tools failed -  stdio
  • at91/sama5d3: Building and installing tools failed -  stdio
  • at91/sama5d4: Building and installing tools failed -  stdio
  • bcm53xx/generic: Building and installing tools failed -  stdio
  • brcm63xx/smp: Building and installing tools failed -  stdio
  • brcm2708/bcm2708: Building and installing tools failed -  stdio
  • brcm2708/bcm2709: Building and installing tools failed -  stdio
  • lantiq/xrx200: Building and installing tools failed -  stdio
  • layerscape/armv7: Building and installing tools failed -  stdio
  • octeon/generic: Building and installing tools failed -  stdio
  • ramips/mt7620: Building and installing tools failed -  stdio
  • ramips/mt7621: Building and installing tools failed -  stdio
  • samsung/s5pv210: Building and installing tools failed -  stdio
48f81ee1d00f...
Hauke Mehrtens
sunxi: Remove unneeded patches
In the device tree file the higher offsets of the reset controller are
not used, so this patch supporting higher bits is not needed.
The sunxi architecture switched to the simple reset controller with
kernel 4.19 and then this patch does not apply any more.
The sunxi target in OpenWrt is very close to mainline, so if the device
tree files from the mainline Linux kernel need this the mainline kernel
will get support for this.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
  • at91/sama5d2: Building and installing tools failed -  stdio
  • at91/sama5d3: Building and installing tools failed -  stdio
  • at91/sama5d4: Building and installing tools failed -  stdio
  • bcm53xx/generic: Building and installing tools failed -  stdio
  • brcm63xx/smp: Building and installing tools failed -  stdio
  • brcm2708/bcm2708: Building and installing tools failed -  stdio
  • brcm2708/bcm2709: Building and installing tools failed -  stdio
  • lantiq/xrx200: Building and installing tools failed -  stdio
  • layerscape/armv7: Building and installing tools failed -  stdio
  • octeon/generic: Building and installing tools failed -  stdio
  • ramips/mt7620: Building and installing tools failed -  stdio
  • ramips/mt7621: Building and installing tools failed -  stdio
  • samsung/s5pv210: Building and installing tools failed -  stdio
46d4c09bb64c...
Pawel Dembicki
mpc85xx: disable initramfs image in TL-WDR4900
Initramfs image isn't required for this device and regular
initramfs generation isn't work properly. It create not working
binaries.

This patch disable initramfs image for TL-WDR4900.

Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
  • ar7/ac49x: Building kmods failed -  stdio
  • arc770/generic: Building packages failed -  stdio
  • at91/legacy: Building kmods failed -  stdio
  • at91/sama5d2: Building and installing tools failed -  stdio
  • at91/sama5d3: Building and installing tools failed -  stdio
  • at91/sama5d4: Building and installing tools failed -  stdio
  • ath25/generic: Building packages failed -  stdio
  • ath79/generic: Building packages failed -  stdio
  • ath79/nand: Building packages failed -  stdio
  • ath79/tiny: Building packages failed -  stdio
  • bcm53xx/generic: Building and installing tools failed -  stdio
  • brcm47xx/legacy: Building packages failed -  stdio
  • brcm47xx/mips74k: Building packages failed -  stdio
  • brcm63xx/smp: Building and installing tools failed -  stdio
  • brcm2708/bcm2708: Building and installing tools failed -  stdio
  • brcm2708/bcm2709: Building and installing tools failed -  stdio
  • lantiq/xrx200: Building and installing tools failed -  stdio
  • layerscape/armv7: Building and installing tools failed -  stdio
  • malta/be: Building packages failed -  stdio
  • octeon/generic: Building and installing tools failed -  stdio
  • ramips/mt7620: Building and installing tools failed -  stdio
  • ramips/mt7621: Building and installing tools failed -  stdio
  • samsung/s5pv210: Building and installing tools failed -  stdio
403d36ef3dcc...
Hauke Mehrtens
malta: Add support for kernel 4.19
This adds a kernel configuration file for kernel 4.19 on malta.
CONFIG_POWER_RESET_PIIX4_POWEROFF and CONFIG_POWER_RESET_SYSCON were
activated because malta now uses this driver for reboot.

CONFIG_BLK_DEV_SR was also added because it was also added to the kernel
default configuration.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
  • at91/sama5d2: Building and installing tools failed -  stdio
  • at91/sama5d3: Building and installing tools failed -  stdio
  • at91/sama5d4: Building and installing tools failed -  stdio
  • bcm53xx/generic: Building and installing tools failed -  stdio
  • brcm63xx/smp: Building and installing tools failed -  stdio
  • brcm2708/bcm2708: Building and installing tools failed -  stdio
  • brcm2708/bcm2709: Building and installing tools failed -  stdio
  • lantiq/xrx200: Building and installing tools failed -  stdio
  • layerscape/armv7: Building and installing tools failed -  stdio
  • octeon/generic: Building and installing tools failed -  stdio
  • ramips/mt7620: Building and installing tools failed -  stdio
  • ramips/mt7621: Building and installing tools failed -  stdio
  • samsung/s5pv210: Building and installing tools failed -  stdio
4029788ff36a...
Hans Dedecker
odhcpd: update to latest git HEAD (FS#2020)
7abbed4 dhcpv6: add setting to choose IA_NA, IA_PD or both
dd1aefd router: add syslog tracing for skipped routes
0314d58 router: filter route information option
5e99738 router: make announcing DNS info configurable (FS#2020)
1fe77f3 router: check return code of odhcpd_get_interface_dns_addr()
8f49804 config: check for invalid DNS addresses

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
3f0eb71daeec...
Hans Dedecker
busybox: add ALTERNATIVES for wget
Busybox wget applet conflicts with the version from uclient.
Fix this by using ALTERNATIVE support for wget in busybox.

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
  • at91/sama5d2: Building and installing tools failed -  stdio
  • at91/sama5d3: Building and installing tools failed -  stdio
  • at91/sama5d4: Building and installing tools failed -  stdio
  • bcm53xx/generic: Building and installing tools failed -  stdio
  • brcm63xx/smp: Building and installing tools failed -  stdio
  • brcm2708/bcm2708: Building and installing tools failed -  stdio
  • brcm2708/bcm2709: Building and installing tools failed -  stdio
  • lantiq/xrx200: Building and installing tools failed -  stdio
  • layerscape/armv7: Building and installing tools failed -  stdio
  • octeon/generic: Building and installing tools failed -  stdio
  • ramips/mt7620: Building and installing tools failed -  stdio
  • ramips/mt7621: Building and installing tools failed -  stdio
  • samsung/s5pv210: Building and installing tools failed -  stdio
2eeb5d6aac55...
Hauke Mehrtens
sunxi: Refresh kernel 4.14 configuration
Refresh the sunxi kernel configuration without doing any intentional
changes.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
  • at91/sama5d2: Building and installing tools failed -  stdio
  • at91/sama5d3: Building and installing tools failed -  stdio
  • at91/sama5d4: Building and installing tools failed -  stdio
  • bcm53xx/generic: Building and installing tools failed -  stdio
  • brcm63xx/smp: Building and installing tools failed -  stdio
  • brcm2708/bcm2708: Building and installing tools failed -  stdio
  • brcm2708/bcm2709: Building and installing tools failed -  stdio
  • lantiq/xrx200: Building and installing tools failed -  stdio
  • layerscape/armv7: Building and installing tools failed -  stdio
  • octeon/generic: Building and installing tools failed -  stdio
  • ramips/mt7620: Building and installing tools failed -  stdio
  • ramips/mt7621: Building and installing tools failed -  stdio
  • samsung/s5pv210: Building and installing tools failed -  stdio
26a016731d1f...
Mathias Kresin
firmware-utils: mksercommfw: overhaul image creation
Move the zip compression into a build recipe. Pad the image using the
existing build recipes as well to remove duplicate functionality

Change the code to append header and footer in two steps. Allow to use a
fixed filename as the netgear update image does.

Use a fixed timestamp within the zip archive to make the images
reproducible.

Due to the changes we are now compatible to the gnu89 c standard used by
default on the buildbots and we don't need to force a more recent
standard anymore.

Beside all changes, the footer still looks wrong in compare to the
netgear update image.

Signed-off-by: Mathias Kresin <dev@kresin.me>
  • kirkwood/generic: Uploading target files failed -  stdio
18c9faa03211...
Mathias Kresin
tools: zip: add option for reproducible archives
Add the option -mt/--mtime to pass a timestamp which is used as filedate
for the containing files.

So far, it isn't used for anything written to the extra fields,
therefore requires the -X (eXclude eXtra file attributes) parameter to
be effective.

Signed-off-by: Mathias Kresin <dev@kresin.me>
  • kirkwood/generic: Uploading target files failed -  stdio
0e78af22d95d...
Mathias Kresin
firmware-utils: mkdlinkfw: fix error handling
fread() doesn't set errno, ferror need to be used to check for errors.
While at it, check if we read the expect number of elements.

Signed-off-by: Mathias Kresin <dev@kresin.me>
  • at91/sama5d2: Building and installing tools failed -  stdio
  • at91/sama5d3: Building and installing tools failed -  stdio
  • at91/sama5d4: Building and installing tools failed -  stdio
  • bcm53xx/generic: Building and installing tools failed -  stdio
  • brcm63xx/smp: Building and installing tools failed -  stdio
  • brcm2708/bcm2708: Building and installing tools failed -  stdio
  • brcm2708/bcm2709: Building and installing tools failed -  stdio
  • lantiq/xrx200: Building and installing tools failed -  stdio
  • layerscape/armv7: Building and installing tools failed -  stdio
  • octeon/generic: Building and installing tools failed -  stdio
  • ramips/mt7620: Building and installing tools failed -  stdio
  • ramips/mt7621: Building and installing tools failed -  stdio
  • samsung/s5pv210: Building and installing tools failed -  stdio
055cdab2bb22...
Hans Dedecker
uclient: add ALTERNATIVES for wget
Don't symlink uclient-fetch anymore to /bin/wget but rather use
the ALTERNATIVES support for wget to install it as /usr/bin/wget.
Let uclient-fetch provide wget

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
  • at91/sama5d2: Building and installing tools failed -  stdio
  • at91/sama5d3: Building and installing tools failed -  stdio
  • at91/sama5d4: Building and installing tools failed -  stdio
  • bcm53xx/generic: Building and installing tools failed -  stdio
  • brcm63xx/smp: Building and installing tools failed -  stdio
  • brcm2708/bcm2708: Building and installing tools failed -  stdio
  • brcm2708/bcm2709: Building and installing tools failed -  stdio
  • lantiq/xrx200: Building and installing tools failed -  stdio
  • layerscape/armv7: Building and installing tools failed -  stdio
  • octeon/generic: Building and installing tools failed -  stdio
  • ramips/mt7620: Building and installing tools failed -  stdio
  • ramips/mt7621: Building and installing tools failed -  stdio
  • samsung/s5pv210: Building and installing tools failed -  stdio
01e95dc0dc66...
Mathias Kresin